Pneumatic conveying

Pneumatic conveying moves powders and granular materials through pipelines using air. We work on making its slowest, gentlest and least predictable modes reliable enough to design with confidence.

In dense-phase and slug flow, the material travels through the pipe slowly, as plugs or slugs. Low velocity means less particle breakage and pipeline wear, but the flow is harder to predict and can become unstable. We combine pilot-scale test rigs, in-pipe measurement and coupled CFD-DEM modelling to work out how slugs form and move, what pressure they need, and where the boundaries of stable operation lie.

Problems we can help with

  • Pipelines that block, surge or vibrate
  • High pipeline wear or product breakage
  • Too much air, energy or pressure needed for the throughput
  • Predicting the conveying characteristics of a new material or a longer line

If the answer needs new research, talk to us about a project. For routine testing or design work, TUNRA Bulk Solids is usually the quicker route.

Current research

  • Slug flow stability: mapping the conditions under which horizontal slug flow becomes unstable, and predicting slug velocity and the stationary layer ahead of each slug.
  • CFD-DEM modelling: resolving the relationship between particle velocity and porosity inside slugs to build better design models.

Selected publications

Researchers

Professor Kenneth Williams, Dr Alex Lavrinec, Emeritus Professor Mark Jones